Already Registered? Login Here Now!

Safe Work Practices
Safe work practices are a set of guidelines on how to perform a specific task that may not always be done in exactly the same way.  These practices should be developed to mitigate hazards that have been identified through the hazard management process.  Safe work practices should include lockout/tagout, decontamination of equipment, hot-work permit, confined-space entry, control of access, shift handover, and simultaneous operations.  Risk assessment and risk management principles should be integrated into safe work practices. 

The Mary Kay O’Connor Process Safety Center and the Texas A&M Engineering Experiment Station will be issuing a certificate of completion for 1 Professional Development Hour for each of the six Process Safety events in 2018. To qualify, attendees must be present during the entire webinar and they must indicate in our poll/survey that they wish to receive a certificate.

 

KV_mannan_1[1].jpg

Dr. M. Sam Mannan, PE, CSP, DHC
Regents Professor and Director
Mary Kay O'Connor Process Safety Center

Artie McFerrin Department of Chemical Engineering
Texas A&M University System
Learn More about Dr. Mannan...

The need for process safety in the chemical industry is paramount.  Technical knowledge and understanding of hazards and risks associated with operations in addition to the implementation of that knowledge into practice are the keys to keeping workers and the environment safe.  Chemical Processing’s Process Safety webinar series aims to address best practices by covering the major areas within process safety to improve process safety performance.

Dr. M. Sam Mannan, PE, CSP, DHC, regents professor and director, Mary Kay O' Connor Safety Center, worked with the editors of Chemical Processing to create this series. He serves as the expert presenter for each webinar.

Sponsored by:
RedVector_White_Cropped.jpg

 

Register Now!

Check out the Chemical Processing 2017 Webinar Series now!

Privacy Policy

Untitled Document